Home / Products / Microscope Camera / USB Series / MDX303
MDX303
Sensor of Camera
Sensor Type:
Sensor Model:
Optical Format:
Resolution:
Pixel Size:
CMOS
Aptina MT9T001
1/2"
2048 x 1536, 3 M
3.2μm x 3.2μm

* The Aptina MT9T001 is a QXGA-format 1/2-inch CMOS active-pixel digital image sensor with an active imaging pixel array of 2,048H x 1,536V. It incorporates sophisticated camera functions on-chip such as windowing, column and row skip mode, and snapshot mode. It is programmable through a simple two-wire serial interface. The 3-megapixel CMOS image sensor features Aptina's breakthrough low-noise CMOS imaging technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS.
Electrical & Optical Parameters
Frame Rate:
Shutter Type:
Dynamic Range:
S/N Ratio:
Exposure Control:
Exposure Time:
White Balance:
Gain:
ADC:
Status LED:
Data Interface:
Power Supply:
Power Consumption:
Optical Mount:
Filter:
11 fps
Electronic Rolling Shutter
61 dB
43 dB
Real Time Automatic, Single Automatic, and Manual adjust RGB separately
0.05ms ~ 3000ms
Automatic, Manual & Regional white balance
1x ~ 8x
10 bit
Normally on when power on; blinking when working
USB 2.0
USB 2.0, 5V
2.5 W, Standby: 0.5 W
C Mount
650nm IR cut-off filter
System Requirements
Windows
Microsoft® Windows® XP / 7 / 8 /8.1/10(32 & 64 bit)
CPU: Dual core 3.0 GHz or higher
Memory: 4 G or above
Hard Disk Space: At least 10 GB available
Operating & Storage Environment
Operating Temperature:
Storage Temperature:
Working Humidity:
Storage Humidity:
0°C ~ 40°C
-20°C ~ 60°C
30~60%RH
10~80%RH
Dimensions & Weight

Weight: 250 g
In the Box
Camera MDX303
USB Cable
CD for Software Installation Documentation