Sensor of Camera

Sensor Type:

Sensor Model:

Optical Format:

Resolution:

Pixel Size:

Color CMOS 

ONSEMI MT9P001

1/2.5"

2592 x 1944, 5M

2.2μm x 2.2μm

* The ON Semiconductor MT9P001 is a 1/2.5-inch CMOS active-pixel digital image sensor with an active imaging pixel array of 2592 H x 1944 V. It incorporates sophisticated camera functions on-chip such as windowing, column and row skip mode, and snapshot mode

Electrical & Optical Parameters

Frame Rate:

Shutter Type:

Dynamic Range:

S/N Ratio:

Exposure Control:

White Balance:

Status LED:

Data Interface:

Power Supply:

Power Consumption:

Optical Mount:

Filter:

10 fps

Electronic Rolling Shutter

70.1 dB

38.1 dB

Real Time Automatic, Single Automatic, and Manual adjust RGB separately

Automatic and Manual

Normally on when power on; blinking when working

2.4G WiFi

Micro USB 2.0, 5V

2.5W, Standby: 0.5W

C Mount

650nm IR cut-off filter

Wireless Parameters

WLAN Protocol:

Working Frequency:

Stream Data Rate:

​

​

Receive Sensitivity:

​

​

Transmission Power

Wi-Fi Indicator

IEEE 802.11b/g/n

2.400~2.4835 GHz

IEEE 802.11n: up to 150 Mbps 1T1R

IEEE 802.11b: up to 11 Mbps

IEEE 802.11g: up to 54 Mbps

-61 dBm@10% PER at HT40 MCS7

-61 dBm@10% PER at HT40 MCS7

-85 dBm@10% PER at 11Mpbs

IEEE 802.11n: 16±1.5 dBm @ HT40 MCS7 2.4 GHz band

LED off without WLAN

LED on when Wi-Fi is not connected

LED flashes when Wi-Fi is connecting with camera

LED flashes per second during communication

System Requirements

Windows

​

​

​

​

iOS:

​

​

Android:

Microsoft® Windows® XP / 7 / 8 /8.1/10(32 & 64 bit)

CPU: Dual core 3.0 GHz or higher

Memory: 4 G or above

Hard Disk Space: At least 10 GB available

Wireless Network Card (supports IEEE 802.11n / ac)

iPhone X, 8, 8 Plus, 7, 7 Plus, 6s, 6s Plus, 6, 6 Plus
iPad Pro (12.9 inch, 2nd Gen.), (12.9 inch, 1st Gen.), (10.5 inch), (9.7 inch)
iPad Air 2, iPad mini 4

Android 4.0 or above

CPU: Dual core 1.7 GHz or higher

RAM: 1 G or above

ROM: 8 G or above